Athon AM 725 Microemulsion is an aqueous aminopolysiloxane microemulsion.
•Improves hand touch
•Provides good sewing properties for fabrics
•Low yellowing
•Especially suitable for polyester and polyester blends with cellulosic fibers.
•Suitable for use in continuous and discontinuous finishing units commonly used in the textile industry.For less whitening effect on cellulosic fabrics treated with fluorescent whiteners, the bath pH should be kept below 6. Drying temperatures should not exceed 120°C.
Use recommendations:
It is recommended to dilute Athon AM 725 Microemulsion using common cold water, at a ratio of 1:5 to 1:8.
Procedure:
•Add half the desired amount of water.
•Add Athon AM 725 Microemulsion while stirring for 30 minutes.
•Keep stirring and add the other half of total amount of water.
•Keep stirring for another 10 minutes.
The dilution time can be reduced (10 – 15 minutes) by gently heating the initial mixture to 40-50°C.
Application by foulard (paddling):
5 to 10 g/L based on pure Athon AM 725 Microemulsion, or 30 – 60g/L based on a 1:6 dilution of the product in water.
Maintain pH at 5.5 – 6.5 using acetic acid.
Application by exhaustion:
For a 1:5 – 1:20 bath ratio, use 3 to 6% Athon AM 725 Microemulsion as supplied, and maintain the pH at 5.5 – 6.5 using acetic acid. Drying for 20min at 40°C.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 715 Emulsion is a finely dispersed silicone based water emulsion.
Athon AM 715 Emulsion has particle size in the nanometer range. It can be easily diluted with water or easily incorporated into formulations by cold blending.
Athon AM 715 Emulsion is mainly used as an active polisher in the household cleaning industry. It is also ideal for impregnating natural or synthetic textiles at the washing machine, where it is recommended to be applied during the rinse cycle. The impregnation effect is achieved without loss of tissue transpiration.
In addition, Athon AM 715 Emulsion is suitable for hydrophobizing various materials such as textiles, leather, wood, cork, paper, etc. For these applications, it is diluted with water to an Actives Content of 1 to 5% (from 6 to 30g of the product plus sufficient water for a total of 100g).
Household
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 669 Emulsion is an aqueous, nonionic emulsion containing 60% amino functional silicone fluid.
Athon AM 669 Emulsion provides durability to products formulated with it, being easily incorporated into textile formulations in combination with conventional softeners.
Provide elastic effect to fabrics, preventing the formation of wrinkles. It improves smoothness of the treated fabrics even without the ironing process.
It should be preferably mixed to the fabric softener at the end of the fabric production process under gentle agitation. Its dosage in the softener depends on the desired performance and should be balanced according to the content of organic softener in the composition.
Household
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 661 Emulsion is a concentrated macro-emulsion of silicone with amine groups in water.
Athon AM 661 Emulsion is easily incorporated into textile formulations in combination with conventional softeners.
It provides elastic effect to fabrics, preventing the formation of wrinkles and improves smoothness of the treated fabrics even without the ironing process.
It should be preferably mixed at the end of the fabric softener production process under gentle agitation. Its dosage in the softener depends on the desired performance and should be balanced according to the content of organic softener in the composition.
Household
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 649 Emulsion is an aqueous cationic emulsion containing amino functional silicone fluid.
Athon AM 649 Emulsion is a white, milky liquid with homogeneous appearance. Excellent stability even after dilution. Good resistance to detergents and compatible with organic softeners. Provides durability to formulations, being easily incorporated into textile formulations and car paint treatments.
Product used as raw material for the production of car care and home care materials containing solvents (e.g. polishers, vinyl protectors etc.). Widely used as an aid in fabric softening products. Facilitates the ironing process.
Household
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon MH 950 Emulsion is a methyl hydrogen hydride silicone emulsion, or polymethylhydrogensiloxane. Does not contain organic solvents in its formulation.
•Can be diluted with water to improve dispersion
•Releases hydrogen gas when mixed with bases, heavy metals or their compounds, promoting cross-linking and adhesion to surfaces
•Provides durable water repellency
Treatment for water repellency in plaster parts and plaques when added to the plaster moiety. Athon MH 950 Emulsion is added to the mixing water of the gypsum paste. The addition of 0.2 to 0.8% of the dry mass of gypsum leads to a marked reduction in water absorption. The efficiency of the treatment depends on the type of gypsum, the water / gypsum ratio and the presence of additives such as starch, cellulose or surfactants. Preliminary tests are always required to establish the required quantity of product. The product is not recommended for surface treatment of plaster elements.
Also utilizing in semi-permanent release agent formulations as a crosslinking agent.
Water repellent
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
A&S MH 923 Emulsion is a methyl hydrogen hydride silicone emulsion, or polymethylhydrogensiloxane. Does not contain organic solvents in its formulation.
•Can be diluted with water to improve dispersion
•Releases hydrogen gas when mixed with bases, heavy metals or their compounds, promoting cross-linking and adhesion to surfaces
•Provides durable water repellency
Treatment for water repellency in plaster parts and plaques when added to the plaster moiety. A&S MH 950 Emulsion is added to the mixing water of the gypsum paste. The addition of 0.3 to 1.2% of the dry mass of gypsum leads to a marked reduction in water absorption. The efficiency of the treatment depends on the type of gypsum, the water / gypsum ratio and the presence of additives such as starch, cellulose or surfactants. Preliminary tests are always required to establish the required quantity of product. The product is not recommended for surface treatment of plaster elements.
Also utilizing in semi-permanent release agent formulations as a crosslinking agent.
Water repellent
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 660 Emulsion is an aqueous, nonionic emulsion containing 60% high viscosity silicone fluid.
•Athon EM 660 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation. Good lubricating properties and chemically inert. Excellent stability even after dilution
•Good resistance to detergents, presenting low viscosity which favors the wetting of the substrates on which it is applied
Athon EM 660 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 360 Emulsion is a general purpose, nonionic aqueous emulsion with 60% medium viscosity silicone fluid.
•Athon EM 360 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation
•Good lubricating properties and chemically inert
Athon EM 360 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 335 Emulsion is a general purpose, nonionic aqueous emulsion with 35% medium viscosity silicone fluid.
•Athon EM 335 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation
•Good lubricating properties and chemically inert
Athon EM 335 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 1001 Emulsion is an anionic emulsion containing very high molar mass silicone polymer with OH terminals.
Athon OH 1001 Emulsion contains silicone fluid with OH terminals obtained by emulsion polymerization. Viscosity of the fluid reaches more than 1,000,000 mPa.s.
Athon OH 1001 Emulsion can be used in industrial processes that require silicone actives of very high molar mass, using water as delivering medium. The medium used should be compatible with the anionic nature of the emulsion.
Release agent
Household
Textile finishing
Thread manufacturing
Leather Treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 695 Emulsion is a high viscosity silicone fluid emulsion.
•Easily incorporated into formulations by cold blending
•Extremely stable finely dispersed emulsion
•Stable to shear even in highly diluted preparations
•Excellent spreading and wetting properties
•Forms a smooth, even film at low concentrations
•General purpose release agent for rubber vulcanization
•Auxiliary ironing of aerosol formulations containing starch
•Additive for fabric softener formulations
•Foundry casting release agent
Athon EM 695 Emulsion can be used diluted to a solids content of 0.5 to 5%. The diluted emulsion can be applied by dipping, spraying or brushing. Usual pneumatic spray application is preferred as it is the most economical method for obtaining a uniform release agent film.
Release agent
Household
Textile finishing
Thread manufacturing
Household & Autocare
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon WR 455 Emulsion is an aqueous emulsion of silicone resin.
•Water dilutable
•Does not contain organic solvents
Athon WR 455 Emulsion is used in plaster preparation and in paint formulations.
Provides surfaces with:
•High permeability to water vapor and CO2
•Low absorption of liquid water
•Low tendency to appear dirty
•Appearance like new for longer
Construction
Paint & Ink
Construction
Canister 20L
Drum 200L
IBC 1.000L
Athon RS 580 Resin Emulsion is a composition containing silicone resin in aqueous emulsion.
•Dilutable in water
•Does not contain organic solvents
Athon RS 580 Resin Emulsion can be used in various formulations that demand a hydrophobic component with good film-forming properties, such as water repellents and coatings in general.
It can be used in conjunction with acrylic resins for paint formulation and in textile applications. It is also indicated in industrial release formulations together with silicone emulsions and waxes.
Paint & Ink
Water repellent
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon PF 252 Emulsion is an emulsion containing polisiloxanes with aryl and alkyl groups.
Athon PF 252 Emulsion is excellent for mold release of parts to be coated, painted, glued or coated in galvanic process. Emulsion stable to dilution and shear with optimum efficiency at low concentrations and easily formulated with other additives. The silicone oil phase is compatible with many organic finishes (inks / coatings / adhesives). The product is recommended for release of parts where post finishing is required.
Athon PF 252 Emulsion is highly recommended for molding, casting and extrusion of aluminum parts and their alloys. Also used for metal materials, rubbers and plastics in manufacturing, molding or extrusion processes. The product can be diluted and spread with brush or sprayed on the molds. The recommended starting dilution is 1: 100 (1 part Athon PF 252 Emulsion for 100 parts water) – test the best dilutions and application conditions before use. Molded parts must be cleaned prior to final finishing.
Metal
Rubber
Plastic
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon WR 460 Emulsion is a 50% non-volatile emulsion containing water- dilutable silane and siloxane mixture for water-repellent treatment of surfaces.
•Good depth of penetration
•Rapid development of water repellency
•Highly durable and effective beading effect (water droplet formation)
•Non-tack drying
•Provides good adhesion for inks
•Compatible with water and environmentally friendly
•Stable in storage, even when diluted
Athon WR 460 Emulsion is an excellent water repellent for many absorbent mineral substrates such as bricks, natural sandstone and mineral agglomerates.
Not so suitable for dense and less absorbent natural stones, especially limestone, marble and reinforced concrete for bridges and roads (refer to Athon CA 770 Silane and Athon CA 794 Silane for this kind of substrates). Due to its aqueous consistency and storage stability when diluted, the product is ideally suited for factory waterproofing of prefabricated building elements based on clay, cellular concrete, mineral fibers and lightweight aggregates.
Athon WR 460 Emulsion can also serve as a water-repellent additive for water-based paints and plasters.
•Use as a hydrofobic impregnant agent:
Tap water is suitable for the preparation of dilutions of the product for use as a water-repellent facade. Dilutions of Athon WR 460 Emulsion in the ratio of 1:4 to 1:9 are recommended depending on how absorbent the substrate is. Always homogenize the concentrate and the diluted product before use. Apply dilution ready for use preferably by drenching. Two “wet on wet” coats are required to ensure complete coverage. If it starts to rain, stop the treatment and cover the impregnated areas.
•Use as an additive in concrete mixture
Pre-dilute Athon WR 460 Emulsion in a ratio of 1:4 with water. This premix should be added to the feed ratio of 1.0% to 5.0% of the cement content of the mixture. A significant reduction in water absorption can already be achieved at a concentration of 1.0% of the cement. The premix is added simultaneously or immediately after the mixing water – it should never be added together with other additives. The original water/cement ratio of the whole mix should be preserved – so the amount of water used in the premix should be discounted from the total water added. The longer the mixing time, the better the distribution of the product within the system, improving the additive effectiveness.
Construction
Paint & Ink
Paints and Varnishes
Construction
Canister 20L
Drum 200L
IBC 1.000L
