Athon AM 8663 Fluid is an aminofunctional silicone fluid.
Athon AM 8663 Fluid is suitable for use in formulations of textile finishes that require non-yellowing materials.
Features excellent softening properties when applied to fibers, knits, cotton fabrics, cotton-polyester blends, and others. Easily formulable in micro and macro emulsions, it is not necessary to use high shear equipment for its preparation.
Textile finishing
Thread manufacturing
Household & Autocare
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8616 Fluid is a self-emulsifying preparation containing silicone- polyether fluid used for softening fabrics with hydrophilic properties.
•Self-emulsifying silicone preparation
•Provides great feeling of softness and smoothness
•Instant hydrophilic behavior and consistent water absorption properties
•Hydrophilic softener especially suitable for cotton, linen, polyester and blends of these fibers
•Excellent fiber elasticity and shape recovery
•Can be applied by exhaust, exhaust and spray processes
Athon AM 8616 Fluid is a self-emulsifying, hydrophilic silicone textile softener developed from new and innovative molecules. Provides softness and smoothness as well as hydrophilicity to virtually all types of fibers and fabrics. Being more effective than other common silicone softeners, it has great performance even applied in smaller amounts. It is very stable in the normal textile finishing process without causing oil stains on the fabric.
Dilution instruction
•It is recommended to dilute Athon AM 8616 FLUID using cold water, in a ratio of 1 to 5 to 1 to 8.
•Add half the amount of water.
•Add Athon AM 8616 FLUID with gentle agitation for 30 minutes.
•Keep stirring and add the other half of the calculated amount of water.
•Continue stirring for another 10 minutes.
The dilution time can be reduced by gently heating the initial mixture to 40 to 50°C.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8097 Fluid is an aminofunctional silicone fluid.
•Soft touch to textile finishes
•Increase of release cycles in formulations of industrial release agents
Athon AM 8097 Fluid is specially formulated to promote soft touch to textile finishes. It also has application in the formulation of industrial release agents.
Textile finishing
Release agent
Household & Autocare
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8070 Fluid is an aminofunctional silicone fluid.
Athon AM 8070 Fluid has been specially developed to provide excellent softening feature. Has low effect on the degree of white in formulations of textile finishes.
Athon AM 8070 Fluid features soft, elastic feel when applied to fibers, knits, cotton fabrics, polyester cotton blends, and more. Easily formulable in micro and macro emulsions. It can be combined with other components such as: esters of fatty acids, paraffin etc.
Acabamento Têxtil
Fabricação de Linha
Household & Autocare
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8025 Fluid is an amino functional silicone fluid.
•Imparts remarkable slickness & softness to various fabrics
•Easily emulsified into a clear micro-emulsion or white emulsion
•Low yellowing
Excellent softening characteristic when applied to fibers, knits, cotton fabrics, cotton-polyester blends, and others. Easily formulable in micro and macro emulsions. No necessary use of high shear equipment for its preparation.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8020 Fluid is amino functional silicone fluid with modified amino groups.
•Premium fabric softener
•Low yellowing
•Hydrophilic effect
Athon AM 8020 Fluid can be applied to fibers, knits, cotton fabrics, cotton-polyester blends, and others. Easily formulable in micro and macro emulsions. It can be combined with other components such as: fatty acid esters, paraffin etc.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8012 Fluid is an aminofunctional silicone-polyether fluid.
Athon AM 8012 Fluid has been specially developed to feature excellent softening properties. No effect on color tone or solidity on dyed items.
Athon AM 8012 Fluid features extra smooth soft hand. Self emulsifiable product, it is easily diluted in water. It provides a hydrophilic characteristic that can be applied diluted only or in formulations combined with other silicone or organic softeners such as fatty acid esters, paraffin and others according to previous evaluation. Can be applied by Foulard or Exhaust.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 0.65 Fluid is the smallest chain volatile linear volatile silicone fluid with the highest evaporation rate, lowest viscosity and lowest surface tension among Athon DM Fluid series fluids.
•Low surface tension
•Highly volatile solvent
Used in formulations of industrial release agents as a component of products for lubrication and desengripantes, in addition to diluent for several applications.
Release agent
Lubricant
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon CM 50 Fluid is a fluid composed of Decamethylcyclopentasiloxane (D5).
Athon CM 50 Fluid is a transparentr, clear, odorless and colorless material The product has no taste, is oily and is not stic.
Good foamer. Low surface tension with excellent spreading.
Raw material in the manufacturing of polydimethylsiloxane polymers and reactive silicone polymers with OH functionality.
Raw material
Industrial processes
Household & Autocare
Canister 20L
Drum 200L
IBC 1.000L
Athon CM 40 Fluid is a fluid composed of Octamethylcyclotetrasiloxane (D4).
Athon CM 40 Fluid is a transparent, clear, odorless and colorless material. The product has no taste, is oily and is not sticky.
Good foamer. Low surface tension with excellent spreading.
Raw material in the manufacturing of polydimethylsiloxane polymers and reactive silicone polymers with OH functionality.
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon MH 900 Fluid is a 100% active material based on polymethylhydrogen siloxane.
•Cure resulting in a resistant film
•Curing time and temperature can be controlled
•Effective at low addition rates
•Can be diluted in solvents to improve dispersion
Water repellent treatment for plaster: Athon MH 900 Fluid is added to the water to be mixed with the gypsum powder for plaster preparation. Good water-repellent properties are obtained by adding 0.2 to 0.5% Athon MH 900 Fluid relative to gypsum powder. The amount of water repellent varies according to the type of gypsum and the gypsum-water mixing ratio.
Treatment of Mineral Fillers: In this case, Athon MH 900 Fluid is used alone or, for example, with 3% glycoltetraoctylene titanate. The polymerization takes place at room temperature. It can be accelerated by heating for a few minutes at 150°C.
CAUTION: Do not take near potash or caustic soda or any other alkaline compound. There is a risk of a violent release of highly flammable products. Likewise, do not use in the presence of alcohols (or solvents containing a significant proportion of them) or other components containing reactive hydrogen atoms (SH, OH …), since the release of hydrogen gas may also occur in such cases.
Water repellent
Release agent
Construction
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 500 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 500 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 350 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 350 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 200 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 200 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Bombona 20L
Tambor 200L
IBC 1.000L
Athon DM 100.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 100.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 100 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 100 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 60.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 60.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 50 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 50 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges. High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 30.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 30.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 12.500 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 12.500 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 10.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 10.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 5000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 5000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 1000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 1000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 1000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH terminated (silanol).
•Athon OH 1000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 1000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Adhesive
Raw material
Industrial Processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 80.000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 80.000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 80.000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 70 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 70 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 70 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 50.000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 50.000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 50.000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 20.000 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 20.000 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 20.000 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 3500 Fluid is a linear, reactive polydimethylsiloxane fluid, OH- terminated (silanol).
•Athon OH 3500 Fluid is a transparent, clear, odorless and colorless material
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•Excellent properties of water repellency and good solubility in several solvents
Raw material for the formulation of electrical circuit insulating materials, release agents, adhesives and paper and fabric coatings. Athon OH 3500 Fluid is a basic polymer for condensation cure RTV-2 silicone rubber compositions as well as for production of RTV-1 sealants.
Release agent
Electrical circuit
Adhesive
Paper coating
Textile coating
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon PF 212 Fluid is a polysiloxane fluid with alkyl and aryl groups. It is an industrial release agent designed for the release of metallic materials, rubbers and plastics in manufacturing, molding or extrusion processes.
Athon PF 212 Fluid provides a film with excellent heat resistance (far superior to polydimethylsiloxane or organic release agents), does not require unusual or extraordinary cleaning operations prior to painting, gluing or miscellaneous coatings application.
Athon PF 212 Fluid is highly recommended for metal parts, rubbers and plastics in manufacturing, molding or extrusion processes.
Prior to use, Athon PF 212 Fluid is diluted with solvents to a desired concentration of 1.0-1.5%. Suitable solvents include: chlorinated, aliphatic and aromatic solvents such as xylene and toluene. Alternatively, Athon PF 212 Fluid may be emulsified and added to water- based formulations. To ensure optimum results, the surface of the material must be free of impurities, oil or grease. Athon PF 212 Fluid is typically applied by brushing or by spraying.
Metal
Rubber
Plastic
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 956 Additive is a product designed as an additive for formulations of inks, paints, varnishes and leather treatment.
•Siloxane additive that eliminates micro-foam in solvent- based systems and acts as a leveling agent
•Excellent antifoaming efficiency at high temperatures
•Eliminates the micro-foam
•Improves leveling and increases brightness
•Improves risk resistance
•Eliminates micro-foam in solvent-based coatings and maintains the integrity of the film
•Improved leveling in inks without solvent
•Improved leveling in water- and solvent-based wood varnishes
•Improves mar resistance in solvent-based industrial coatings
•Improves dispersion of humid pigments
•Help in the orientation of the pigment in finishes with metallic effect
Paint, Ink & Coating
Leather
Paints and Varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon SW 1085 Fluid is a low molar mass ethoxylated trisiloxane- containing silicone fluid formulation that forms a clear solution in water in any proportion at room temperature.
Athon SW 1085 Fluid is a water-soluble silicone surfactant formulation with excellent spreading and surface tension lowering properties.
It gives transparency to adjuvant formulations by forming clear solutions in water at any proportion, unlike common pure trisiloxanes.
Athon SW 1085 Fluid lowers the surface tension of water by 20-22 mN/m in proportions that can reach 0.01% by weight. This very low surface tension leads to the high spreadability or wettability of aqueous solutions on virtually all known surfaces. Materials based on trisiloxanes exhibit the property of superscattering.
The ability to cover a much larger area than common surfactant solutions. Even fluoroalkyl surfactants, which reduce surface tension to even lower levels, do not have the ability to superspread. Actives present in solutions spiked with Athon SW 1085 are charged and penetrate through small openings normally protected from water by high surface energy – for example, stomata of plant leaves, channels in textile fibers or biofilms. These very thin aqueous films are subject to rapid evaporation, often allowing rapid drying on fabrics and hard surfaces.
Unlike pure trisiloxanes on the market, Athon SW 1085 Fluid is a formulation that presents clear solutions in water in any proportion at room temperature, providing transparency to adjuvant formulations and other concentrates.
Textile finishing
Agrochemical
Agrochemicals
Canister 20L
Drum 200L
IBC 1.000L
Athon SW 1081 Fluid is low molar weight ethoxylated trisiloxane, submitted to further separation and purification procedures.
Athon SW 1081 Fluid is a water-soluble silicone surfactant with excellent spreading and surface tension reduction properties.
Athon SW 1081 Fluid lowers the surface tension of water to 20-22 mN/m at proportions which may reach 0.01% by weight. This very low surface tension leads to high spreading or wettability of aqueous solutions on virtually all known surfaces.
Trisiloxane-based materials exhibit the super-spreading property – the ability to cover a much larger area than ordinary surfactant solutions. Even fluoroalkyl surfactants, which reduce surface tension to even lower levels, do not have the ability to over-spread. Actives present in solutions containing Athon SW 1081 are carried and penetrate through small openings normally protected from water by high surface energy – for example, plant leaf stomata, textile fiber channels or biofilms. These thin aqueous films are subject to rapid evaporation, often allowing rapid drying in textiles and rigid surfaces.
Textile finishing
Agrochemical
Agrochemicals
Canister 20L
Drum 200L
IBC 1.000L
Athon SW 1010 Fluid is low molar weight ethoxylated trisiloxane.
Athon SW 1010 Fluid promotes rapid spreading, penetration and wetting for agricultural chemical actives. It is a non-ionic silicone surfactant, easily dispersed in water.
Athon SW 1010 Fluid is used to improve the effectiveness of agricultural chemical assets such as herbicides, insecticides, fungicides and plant growth regulators. It improves the dispersion capacity of agricultural chemicals, increasing the absorption of the actives by the plants and increasing the resistance to the removal by rain. It also increases spray coverage, allowing the user to reduce the volume of chemical products used. Athon SW 1010 Fluid used in a proportion of 0.1% reduces the surface tension of formulations of agricultural actives in water down to 20 to 21 mN/m, thus promoting its effectiveness.
Agrochemical
Agrochemicals
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1947 Fluid is a high molecular weight silicone-polyether fluid.
•Athon SPE 1947 Fluid is used as an emulsifier, a spreading agent and surface tension reducer in various types of formulations
•Soluble in water and alcohol
•Good compatibility with PU
•Non-reactive
•Textile: spin-finishing additive, texturing oil, knitting oil
•Automotive and household products: brightness, compatible with water-based systems
•Pulp&Paper: improves defoaming performance in defoamers for brown stock
•PU Foam: additive for flexible foam preparation and for MDI compatibility with water
Textile finishing
Household
Autocare
PU foam
Pulp & Paper
Industrial Release Agents
Industrial Process
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1930 Fluid is a medium molecular weight silicone-polyether fluid.
Athon SPE 1930 Fluid is a dispersing agent, surface tension reducer, drainage aid, softener and dispersant used in various types of formulations in the chemical industry. It also improves gloss, lubricity, abrasion resistance, release, anti-blocking and other surface properties in textiles, coatings and other applications such as concrete, roof coatings, rubber etc.
•Textile: spin-finishing additive, texturing oil, knitting oil.
•Automotive and household products: gloss, slip, lubricity.
•Modification of polymers: co-reactant of polyester, isocyanate and epoxy resins – improves flexibility properties at low temperature, softness, elasticity, hydrophilicity, breathability and abrasion resistance of the finished materials.
•Promotes foam in aqueous solutions, stabilizing the air/water interface and allowing generation and stability of foams, in a much lower degree of foaming than anionic surfactants such as sodium lauryl ether sulfate.
Textile finishing
Household
Autocare
Household & Autocare
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1902 Fluid is a silicone-polyether fluid.
•Dispersible in water and soluble in alcohol
•Good PU compatibility
•Antistatic agent
•Leveling agent
•Non-reactive
•Lubricating effect
Athon SPE 1902 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations. Used in:
•Textile finishes
•Cleaners
•Waxes
•Polishers
•Car care
Textile finishing
Household
Autocare
PU foam
Industrial processes
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1901 Fluid is a silicone-polyether fluid.
•Soluble in water and alcohol
•Good PU compatibility
•Profoamer for PU foam coatings
•Leveling agent
•Non-reactive
•Athon SPE 1901 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations.
•Suitable for stabilizing PU foam for stable expanded coating and for use on most non-woven substrates
•Also used in textile finishing formulations, cleaners, waxes and polishes in household cleaning and car care products
Textile finishing
Household
Autocare
PU foam
Industrial processes
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1900 Fluid is a high molar mass, silicone-polyether fluid, finished with acethoxy group.
Athon SPE 1900 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations
•Soluble in water and alcohol
•Good compatibility with PU
•Profoamer for PU foam coatings
•Leveling agent
•Non-reactive
•Athon SPE 1900 Fluid is suitable for stabilizing PU foam in obtaining stable expanded coating and for use on most nonwoven substrates
•It is designed as a semi-durable hydrophilic treatment for nonwoven substrates, especially polyolefin-based materials
Textile finishing
Household
Autocare
PU foam
Industrial Release Agents
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 967 Additive is a silicone-based product designed for use in water-based paints, inks and coatings.
Athon AD 967 Additive is a water-soluble silicone surfactant with excellent spreading and surface tension reduction properties.
•Improved spreading of water-based coatings on difficult substrates
•Improves the dispersion of water-soluble flexographic and rotographic inks for PET, polypropylene and high slip polyethylene used in flexible packaging
•Promotes reduction of the amount of organic co-solvents used for good spreading and delivers improved printing characteristics
Paint & Ink
Paints and Varnishes
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 957 Additive is a product designed as an additive for formulations of paints, varnishes and leather treatment.
Athon AD 957 Additive is soluble in aliphatic and aromatic solvents.
Athon AD 957 Additive promotes slip, increase gloss, pigment compatibility, leveling and scratch resistance for paint applications and coatings. Compatible with acrylic, alkyd, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Accepts reapplication when used as directed. Typical levels of use range from 0.05% to 2.0%, depending on the desired effect and the formulation (resin type, solvent base or water base, UV or temperature drying cure, etc.)
Paint, Ink & Coating
Leather
Paints and Varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 947 Additive is a product designed as an additive for formulations of paints, inks, varnishes and leather treatments.
Athon AD 947 Additive is used to reduce surface tension, as an emulsifier and as a spreading agent and surface tension reducer in various types of paints and coatings formulations.
•Soluble in water and alcohol
•Improves leveling
•Increases brightness
•Paints and coatings: mar resistance agent, slip additive
•Leather finishing: lubricity, softening agent
Paint, Ink & Coating
Leather
Paints and varnishes
leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 929 Additive is a product designed as an additive for formulations of paints and inks.
•Improves flow, leveling and gloss
•Compatible with acrylic, epoxy, polyesters and polyurethane systems
Athon AD 929 Additive can be used in coatings and organic coatings of various types: water based, solvent based, high solids, UV curing and solventless. It reduces surface tension, improves spreadability, flow, mar resistance, leveling, brightness and prevents blocking.
The recommended concentration used is 0.1 to 1.0% by weight, based on the total solids. It is added during the final dilution process.
Paint, Ink & Coating
Paints and varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 919 Addtive is a product designed as an additive for formulations of paints, inks, varnishes and leather treatments.
Athon AD 919 Addtive is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations.
•Soluble in water and alcohol
•Leveling agent
•Non-reactive
•More compatible with organic resins than polydimethylsiloxane
•Slip promoting agent
•Mar resistance
•Anti-blocking
•Increases gloss
•Reduces orange peel effect
•It is designed as a semi-durable hydrophilic treatment for nonwoven substrates, especially polyolefin-based materials
•Can be used as a leveling agent in a solvent-based final leather finish
•Additive designed to provide slip, mar resistance and anti- blocking effect in water and solvent based formulations
•Improves leveling, reduces orange peel effect, increases gloss and provides a smooth, satiny feel on the surface
•Prevents pinholing, craters and fish eyes resulting from poor spreading on contaminated or low surface tension substrates
Paint, Ink & Coating
Leather
Paints and varnishes
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AD 918 Additive is a product designed as an additive for formulations of paints, inks, varnishes and leather treatments.
Athon AD 918 Additive is a surfactant and surface tension reducer. Improves gloss, lubricity, abrasion resistance, release, anti-locking and other surface properties in paints and coatings.
•Paints and coatings: mar resistance agent, slip additive
•Leather: spreading, lubricity and softness
•Compatible with water, solvent and UV curing coatings systems and with acrylic, alkyd, PU, polyester and epoxy resins, promoting spreading, flowability and leveling, penetration, slippage,
release, as well as mar, abrasion and stain resistance
Paint, Ink & Coating
Leather
Paints and varnishes
Canister 20L
Drum 200L
IBC 1.000L
