Silicones are widely used in formulation of release agents and lubricants for general industrial use, due to specific properties as low surface tension and excellent thermal stability, which allow use in a wide range of processes with good results and excellent cost benefit for the customer. The most common processes of use are lamination, labeling, molding, calendering, extrusion and general lubrication. Athon has a line of silicone-based products for application in various formulations of release agents, with the possibility of formula adjustments and customer support to improve finishing aspects of the part as well as defining the best cost for each type of process.
Athon CM 40 Fluid is a fluid composed of Octamethylcyclotetrasiloxane (D4).
Athon CM 40 Fluid is a transparent, clear, odorless and colorless material. The product has no taste, is oily and is not sticky.
Good foamer. Low surface tension with excellent spreading.
Raw material in the manufacturing of polydimethylsiloxane polymers and reactive silicone polymers with OH functionality.
Raw material
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
Athon PF 252 Emulsion is an emulsion containing polisiloxanes with aryl and alkyl groups.
Athon PF 252 Emulsion is excellent for mold release of parts to be coated, painted, glued or coated in galvanic process. Emulsion stable to dilution and shear with optimum efficiency at low concentrations and easily formulated with other additives. The silicone oil phase is compatible with many organic finishes (inks / coatings / adhesives). The product is recommended for release of parts where post finishing is required.
Athon PF 252 Emulsion is highly recommended for molding, casting and extrusion of aluminum parts and their alloys. Also used for metal materials, rubbers and plastics in manufacturing, molding or extrusion processes. The product can be diluted and spread with brush or sprayed on the molds. The recommended starting dilution is 1: 100 (1 part Athon PF 252 Emulsion for 100 parts water) – test the best dilutions and application conditions before use. Molded parts must be cleaned prior to final finishing.
Metal
Rubber
Plastic
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon PF 212 Fluid is a polysiloxane fluid with alkyl and aryl groups. It is an industrial release agent designed for the release of metallic materials, rubbers and plastics in manufacturing, molding or extrusion processes.
Athon PF 212 Fluid provides a film with excellent heat resistance (far superior to polydimethylsiloxane or organic release agents), does not require unusual or extraordinary cleaning operations prior to painting, gluing or miscellaneous coatings application.
Athon PF 212 Fluid is highly recommended for metal parts, rubbers and plastics in manufacturing, molding or extrusion processes.
Prior to use, Athon PF 212 Fluid is diluted with solvents to a desired concentration of 1.0-1.5%. Suitable solvents include: chlorinated, aliphatic and aromatic solvents such as xylene and toluene. Alternatively, Athon PF 212 Fluid may be emulsified and added to water- based formulations. To ensure optimum results, the surface of the material must be free of impurities, oil or grease. Athon PF 212 Fluid is typically applied by brushing or by spraying.
Metal
Rubber
Plastic
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon RL 200 Release Agent is a composition containing silicone fluids and resins, used as a semi-permanent release agent in industrial processes.
•Soluble in common aromatic and aliphatic solvents
•Temperature cure or ambient drying, forming a durable non-greasy release coating
•Temperature resistant, lasts multiple release cycles
•Storage stable, even when diluted
Athon RL 200 Release Agent is suitable for mold release of plastic parts, adhesives, elastomeric products, and reconstituted wood. Plastics include: epoxies, melamines, methacrylates, phenolics, polyesters and polyurethanes.
Efficient release agent also for chipboard molding, metal fabrication and rubber gaskets.
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon RL 22 Release Agent is a composition containing a silicone fluid functionalized with amine groups, used as a release agent in industrial processes.
•Good spreading
•Efficient release
•Storage stable, even when diluted
Athon RL 22 Release Agent is used in common industrial release processes, replacing pure silicone fluids for better performance and efficiency. Before use, it is diluted with solvents to the desired concentration. Suitable solvents include: chlorinated, aliphatic (hexane, turpentine) and aromatic (xylene and toluene) solvents. Also used as a glidant in household cleaning formulations of waxes and furniture polishes.
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon FF 500 Gel is a very high molecular weight, partially crosslinked silicone fluid composition in cyclosiloxane used in the formulation of release agents, waxes and polishes.
•Good spreading
•Efficient release
•Storage stable, even when diluted
•Promotes fluidity and slippage
Athon FF 500 Gel is used in common industrial release processes, replacing pure silicone fluids for better performance and efficiency. Before use, it is diluted with solvents to the desired concentration. Suitable solvents include: chlorinated, aliphatic (hexane, turpentine) and aromatic (xylene and toluene) solvents. Also used as a glidant in household cleaning formulations of waxes and furniture polishes.
Release agent
Household
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon FF 440 Fluid is a polydimethylsiloxane based antifoam, 100% active, easily dispersible in water.
•Good spreading
•Efficient release
•Storage stable, even when diluted
•Promotes fluidity and slippage
Athon FF 440 Fluid is used in common industrial release processes, replacing pure silicone fluids for better performance and efficiency. Before use, it is diluted with solvents to the desired concentration. Suitable solvents include: chlorinated, aliphatic (hexane, turpentine) and aromatic (xylene and toluene) solvents. Also used as a glidant in household cleaning formulations of waxes and furniture polishes.
Release agent
Household
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon FF 340 Fluid is a solution of a silicone fluid with very high melecular weight silanol terminals in cyclosiloxane, used in the formulation of release agents, waxes and polishes.
•Good spreading
•Efficient release
•Storage stable, even when diluted
•Promotes fluidity and slippage
Athon FF 340 Fluid is used in common industrial release processes, replacing pure silicone fluids for better performance and efficiency. Before use, it is diluted with solvents to the desired concentration. Suitable solvents include: chlorinated, aliphatic (hexane, turpentine) and aromatic (xylene and toluene) solvents. Also used as a glidant in household cleaning formulations of waxes and furniture polishes.
Release agent
Household
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 130 Release Agent is a composition containing amino-silicone fluid, used as a release agent in industrial processes.
•Good spreading
•Efficient release
•Stable in storage, even when diluted
Athon AM 130 Release Agent is used in common industrial release processes, replacing common silicone fluids for better performance and efficiency. Before use, it is diluted with solvents to the desired concentration. Suitable solvents include: chlorinated, aliphatic (hexane, turpentine) and aromatic solvents (xylene and toluene).
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon OH 1001 Emulsion is an anionic emulsion containing very high molar mass silicone polymer with OH terminals.
Athon OH 1001 Emulsion contains silicone fluid with OH terminals obtained by emulsion polymerization. Viscosity of the fluid reaches more than 1,000,000 mPa.s.
Athon OH 1001 Emulsion can be used in industrial processes that require silicone actives of very high molar mass, using water as delivering medium. The medium used should be compatible with the anionic nature of the emulsion.
Release agent
Household
Textile finishing
Thread manufacturing
Leather Treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon MH 950 Emulsion is a methyl hydrogen hydride silicone emulsion, or polymethylhydrogensiloxane. Does not contain organic solvents in its formulation.
•Can be diluted with water to improve dispersion
•Releases hydrogen gas when mixed with bases, heavy metals or their compounds, promoting cross-linking and adhesion to surfaces
•Provides durable water repellency
Treatment for water repellency in plaster parts and plaques when added to the plaster moiety. Athon MH 950 Emulsion is added to the mixing water of the gypsum paste. The addition of 0.2 to 0.8% of the dry mass of gypsum leads to a marked reduction in water absorption. The efficiency of the treatment depends on the type of gypsum, the water / gypsum ratio and the presence of additives such as starch, cellulose or surfactants. Preliminary tests are always required to establish the required quantity of product. The product is not recommended for surface treatment of plaster elements.
Also utilizing in semi-permanent release agent formulations as a crosslinking agent.
Water repellent
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
A&S MH 923 Emulsion is a methyl hydrogen hydride silicone emulsion, or polymethylhydrogensiloxane. Does not contain organic solvents in its formulation.
•Can be diluted with water to improve dispersion
•Releases hydrogen gas when mixed with bases, heavy metals or their compounds, promoting cross-linking and adhesion to surfaces
•Provides durable water repellency
Treatment for water repellency in plaster parts and plaques when added to the plaster moiety. A&S MH 950 Emulsion is added to the mixing water of the gypsum paste. The addition of 0.3 to 1.2% of the dry mass of gypsum leads to a marked reduction in water absorption. The efficiency of the treatment depends on the type of gypsum, the water / gypsum ratio and the presence of additives such as starch, cellulose or surfactants. Preliminary tests are always required to establish the required quantity of product. The product is not recommended for surface treatment of plaster elements.
Also utilizing in semi-permanent release agent formulations as a crosslinking agent.
Water repellent
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 695 Emulsion is a high viscosity silicone fluid emulsion.
•Easily incorporated into formulations by cold blending
•Extremely stable finely dispersed emulsion
•Stable to shear even in highly diluted preparations
•Excellent spreading and wetting properties
•Forms a smooth, even film at low concentrations
•General purpose release agent for rubber vulcanization
•Auxiliary ironing of aerosol formulations containing starch
•Additive for fabric softener formulations
•Foundry casting release agent
Athon EM 695 Emulsion can be used diluted to a solids content of 0.5 to 5%. The diluted emulsion can be applied by dipping, spraying or brushing. Usual pneumatic spray application is preferred as it is the most economical method for obtaining a uniform release agent film.
Release agent
Household
Textile finishing
Thread manufacturing
Household & Autocare
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 189 Release Agent is an 80% aqueous dispersion of extremely high molar mass polydimethylsiloxane.
•Water dispersible
•Used in semi-permanent release agent formulation
Athon EM 189 Release Agent is used in semi-permanent release agent formulation together with Athon MH 950 Emulsion. Contact your Athon representative for more information.
Industrial process
Release agent
Tire release
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8070 Fluid is an aminofunctional silicone fluid.
Athon AM 8070 Fluid has been specially developed to provide excellent softening feature. Has low effect on the degree of white in formulations of textile finishes.
Athon AM 8070 Fluid features soft, elastic feel when applied to fibers, knits, cotton fabrics, polyester cotton blends, and more. Easily formulable in micro and macro emulsions. It can be combined with other components such as: esters of fatty acids, paraffin etc.
Acabamento Têxtil
Fabricação de Linha
Household & Autocare
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 660 Emulsion is an aqueous, nonionic emulsion containing 60% high viscosity silicone fluid.
•Athon EM 660 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation. Good lubricating properties and chemically inert. Excellent stability even after dilution
•Good resistance to detergents, presenting low viscosity which favors the wetting of the substrates on which it is applied
Athon EM 660 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 360 Emulsion is a general purpose, nonionic aqueous emulsion with 60% medium viscosity silicone fluid.
•Athon EM 360 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation
•Good lubricating properties and chemically inert
Athon EM 360 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 335 Emulsion is a general purpose, nonionic aqueous emulsion with 35% medium viscosity silicone fluid.
•Athon EM 335 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation
•Good lubricating properties and chemically inert
Athon EM 335 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 500 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 500 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 350 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 350 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 200 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 200 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Bombona 20L
Tambor 200L
IBC 1.000L
Athon DM 100.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 100.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 100 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 100 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 60.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 60.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 50 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 50 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges. High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 12.500 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 12.500 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 10.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 10.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 1000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 1000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon PC 2000 Silicone Coating is a room temperature cured siloxane-based composition for surface coating.
•One-component system
•Effective on many construction materials
•Single layer application generally sufficient, multi-layer application possible
•Weatherproof
•Water repellent
•Permeable to water vapor
•Dilutable in organic solvents
•Allows removal of graffiti with water
•Enhances surface color
•Protects metal surfaces from corrosion
Athon PC 2000 Silicone Coating is suitable for mineral-based construction materials such as concrete, brick, limestone, natural and artificial stone, plaster, wood and coated metal surfaces as permanent protection against graffiti. For surfaces already coated with paints and other coatings, a previous test is necessary to assess whether there is a need for a combination with a suitable primer.
The product can also be used as a permanent release coating in some industrial processes.
Athon PC 2000 Silicone Coating cures quickly once applied to dry substrates and exposed to moisture in the air.
Curing takes place at the surface and progresses to the substrate based on available ambient moisture. Thorough drying for heavier film layers may require up to 24 hours.
Suitable solvents include aliphatic (hexane, turpentine) and aromatic (xylene and toluene). It is not recommended thinners or others based on ethyl acetate for example. Containers, once opened, must be used until empty. Any remaining coating, exposed to air, will continue to cure and thicken, resulting in surface skin formation and increased viscosity.
Paint, Ink & Coating
Release agent
Industrial Release Agents
Paints and varnishes
Canister 20L
Drum 200L
IBC 1.000L
Athon RS 580 Resin Emulsion is a composition containing silicone resin in aqueous emulsion.
•Dilutable in water
•Does not contain organic solvents
Athon RS 580 Resin Emulsion can be used in various formulations that demand a hydrophobic component with good film-forming properties, such as water repellents and coatings in general.
It can be used in conjunction with acrylic resins for paint formulation and in textile applications. It is also indicated in industrial release formulations together with silicone emulsions and waxes.
Paint & Ink
Water repellent
Release agent
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon MQ 893 Resin is a silicone resin dispersed in polydimethylsiloxane fluid, formulated for high release efficiency.
•Good heat stability
•Water repellency superior to common silicone fluids
•Provides mold release and shine to formulations
Athon MQ 893 Resin is usually diluted with solvent (1 part product to 10 parts solvent) prior to brushing or by spraying onto the mold. Suitable solvents: aliphatic, aromatic or chlorinated hydrocarbons.
Also used in product formulations for HomeCare and AutoCare, providing shine and fixation by film formation.
Release agent
Household
Autocare
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon MQ 885 Resin is a non-flammable hydrotreated hydrocarbon silicone resin solution used in the formulation of mold releases and water repellants.
•Good heat stability
•Water repellency superior to common silicone fluids
•Provides mold release and shine to formulations
Athon MQ 885 Resin is usually diluted with solvent (1 part product to 10 parts solvent) prior to brushing or by spraying onto the mold. Suitable solvents: aliphatic, aromatic or chlorinated hydrocarbons.
Also used in product formulations for HomeCare and AutoCare, providing shine and fixation by film formation, as well as premium water repellency.
Release agent
Household
Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon MQ 835 Resin is a silicone resin dispersed in polydimethylsiloxane fluid, formulated for high release efficiency.
•Good heat stability
•Leaves no residue on metal molds
•Good wetting and spreading in molds
•Less need to clean molded parts before finishing
Athon MQ 835 Resin is usually diluted with solvent (1 part product to 10 parts solvent) prior to brushing or by spraying onto the mold. Suitable solvents: aliphatic, aromatic or chlorinated hydrocarbons.
Also used in product formulations for HomeCare and AutoCare, providing shine and fixation by film formation.
Release agent
Household
Autocare
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon MQ 830 Resin is a silicone resin dispersed in cyclosiloxane fluid, formulated for high release efficiency.
•Good heat stability
•Does not leave residues in metal molds
•Good wetting and spreading in molds
•Less need to clean molded parts before finishing
•Drying with film formation
Athon MQ 830 Resin is used as a release agent normally diluted with solvent prior to application by brushing or spraying into the mold. Suitable solvents: aliphatic, aromatic or chlorinated hydrocarbons.Úlso used in product formulations for HomeCare and AutoCare, providing shine and fixation by film formation.
Release agent
Household
Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon MQ 800 Resin is a powdered silicone resin used in formulation of release agents and products that require shine and fixation.
•Good heat stability
•Does not leave residues in metal molds
•Good wetting and spreading in molds
•Less need to clean molded parts before finishing
•Drying with film formation
Athon MQ 800 Resin is used as a release agent normally diluted with solvent prior to application by brushing or spraying into the mold. Suitable solvents: aliphatic, aromatic or chlorinated hydrocarbons.
Also used in product formulations for HomeCare and AutoCare, providing shine and fixation by film formation.
Release agent
Household
Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1947 Fluid is a high molecular weight silicone-polyether fluid.
•Athon SPE 1947 Fluid is used as an emulsifier, a spreading agent and surface tension reducer in various types of formulations
•Soluble in water and alcohol
•Good compatibility with PU
•Non-reactive
•Textile: spin-finishing additive, texturing oil, knitting oil
•Automotive and household products: brightness, compatible with water-based systems
•Pulp&Paper: improves defoaming performance in defoamers for brown stock
•PU Foam: additive for flexible foam preparation and for MDI compatibility with water
Textile finishing
Household
Autocare
PU foam
Pulp & Paper
Industrial Release Agents
Industrial Process
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1902 Fluid is a silicone-polyether fluid.
•Dispersible in water and soluble in alcohol
•Good PU compatibility
•Antistatic agent
•Leveling agent
•Non-reactive
•Lubricating effect
Athon SPE 1902 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations. Used in:
•Textile finishes
•Cleaners
•Waxes
•Polishers
•Car care
Textile finishing
Household
Autocare
PU foam
Industrial processes
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1901 Fluid is a silicone-polyether fluid.
•Soluble in water and alcohol
•Good PU compatibility
•Profoamer for PU foam coatings
•Leveling agent
•Non-reactive
•Athon SPE 1901 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations.
•Suitable for stabilizing PU foam for stable expanded coating and for use on most non-woven substrates
•Also used in textile finishing formulations, cleaners, waxes and polishes in household cleaning and car care products
Textile finishing
Household
Autocare
PU foam
Industrial processes
Household & Autocare
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon SPE 1900 Fluid is a high molar mass, silicone-polyether fluid, finished with acethoxy group.
Athon SPE 1900 Fluid is used to reduce surface tension, as an emulsifier and as a spreading agent in various types of formulations
•Soluble in water and alcohol
•Good compatibility with PU
•Profoamer for PU foam coatings
•Leveling agent
•Non-reactive
•Athon SPE 1900 Fluid is suitable for stabilizing PU foam in obtaining stable expanded coating and for use on most nonwoven substrates
•It is designed as a semi-durable hydrophilic treatment for nonwoven substrates, especially polyolefin-based materials
Textile finishing
Household
Autocare
PU foam
Industrial Release Agents
Industrial processes
Canister 20L
Drum 200L
IBC 1.000L
