One of the most consolidated applications for the textile segment is the use of functionalized silicones in the form of macro or micro emulsion to promote softness and treatment of natural or synthetic fiber. However, over the last few years, a series of new applications have been developed and, in addition to this family of products, other types of silicones have been consolidated for application in the textile segment, such as EO/PO silicone fluids (used as auxiliaries), resins (which promote finishing and repellency), in addition to defoamers and additives (which allow a wide possibility both in finishing and in process ease, generating differentiation and savings for product formulators for this market). Athon has an extensive range of silicone-based products, as well as entire line of products developed as process aids based on other chemical technologies, generating opportunity and competitiveness for formulators.
Athon FB 550 Antifoam is a high efficiency antifoam emulsion with high Actives Contents.
•Sustained foam control
•Stable at high shear
•Stability for a wide range of pH and temperature conditions
•Ease of dispersion
•Excellent long-term efficiency
•High active material concentration
Athon FB 550 Antifoam can be used in numerous industrial processes where easy dispersion, high antifoaming efficiency, pH variations and high shear conditions are required.
Applications include: textile processes, pulp manufacturing and others.
Industrial process
Textile finishing
Thread manufacturing
Pulp & Paper
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 520 Antifoam is a silicone based antifoaming emulsion containing silica and additives. It can be used in a wide range of applications, being resistant to alkalis and acids and is recommended for processes under extreme pH conditions.
Athon FB 520 Antifoam is a homogeneous, low viscosity emulsion. It is effective even at very low levels, being chemically inert to the foaming medium. Excellent foam breaking as well as good residual action.
The versatility and ease of handling of Athon FB 520 Antifoam allow its use in the most varied applications. It is an excellent breaking agent of foam generated in formulations containing surfactants which are used in the most diverse areas such as agrochemicals, household cleaning products, Autocare, petrochemical industry, or where high performance in extremes of temperature, pH or resistance to saline or surfactant solutions is required. Typical levels between 0.1% and 2.0% are recommended although the ideal level should be established by practical tests. Dilution in water or in the foaming medium is recommended immediately prior to use.
Agrochemical
Household
Autocare
Petrochemical
Industrial process
Water and waste treatment
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 500 Antifoam is a compound based on organofunctional silicone fluids that exhibit high compatibility with organic systems.
Athon FB 500 Antifoam is a self-dispersing product, with the ability to spontaneously form a fine dispersion when added to water.
Athon FB 500 Antifoam is recommended for all organic systems that require a highly compatible antifoaming agent. Thus, it is ideal for applications where silicones would normally cause problems, such as water miscible adhesives and cooling lubricants.
It is particularly recommended for systems with a high surfactant content or involving high shear forces, such as the incorporation of pigments into dispersions. In these systems, purely organic defoamers rapidly become ineffective.
Athon FB 500 Antifoam also serves as an antifoam agent for suspensions rich in fine and strongly foaming particles and in the production of redispersible powders.
Household
Industrial process
Water and waste treatment
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 108 Antifoam is a 100% active, wide-spectrum antifoam compound.
•Easy to use due to low viscosity
•Features high resistance in alkaline environments, making it very versatile
Agrochemical industry, biotechnology, technical processes, fermentation, household cleaning products.
HOW TO USE:
Biological processes: Athon FB 108 Antifoam is added directly to the slurry in the feed tank at the end of the degassing process to suppress the foam and also to deaerate the slurry in the intermediate tank. Amounts generally used from 0.02 to 0.10%.
Formulation of powder detergents: Athon FB 108 Antifoam is added from 5 to 10% to a premixed powder. This premix is then added 2 to 5% to the powdered detergent at the end of the manufacturing process (final recommended product ratio: 0.2 to 0.5%)
Formulation of liquid detergents: Athon FB 108 Antifoam is added at the rate of 0.2 to 0.6% in formulations using thickeners.
Agrochemical
Industrial process
Antifoam
Household
Agrochemicals
Industrial processes
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon FB 101 Antifoam is a 100% active silicone antifoaming compound for use in different industrial applications.
•Effective in aqueous and organic solvent
•Used in low concentrations
Effective foam control in a variety of industrial processes, such as:
•Biological and microbiological processes
•Paper
•Textiles
•Agrochemicals
•Architectural paints & coatings
•PVC pastes and molding resins
•Asphalt manufacturing
The product is concentrated and must be dispersed in the foaming medium for effective action. Prepare 10% to 25% pre-dilutions in a diluent compatible with the medium and use immediately. Final concentrations of 50 to 100 ppm are generally used with good results.
Pulp & Paper
Textile finishing
Paint & Ink
Agrochemical
Release agent
Petrochemical
Agrochemicals
Industrial processes
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon EM 660 Emulsion is an aqueous, nonionic emulsion containing 60% high viscosity silicone fluid.
•Athon EM 660 Emulsion is a white, milky liquid with a homogeneous appearance
•Excellent heat resistance without degradation. Good lubricating properties and chemically inert. Excellent stability even after dilution
•Good resistance to detergents, presenting low viscosity which favors the wetting of the substrates on which it is applied
Athon EM 660 Emulsion is used as a release agent for technical parts of rubber and plastic, as a lubricant, as raw material to formulate car and home care products. It is widely used as a lubricant in thread production equipment and as an ingredient in the composition of fabric finishes.
Release agent
Household
Lubricant
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 725 Microemulsion is an aqueous aminopolysiloxane microemulsion.
•Improves hand touch
•Provides good sewing properties for fabrics
•Low yellowing
•Especially suitable for polyester and polyester blends with cellulosic fibers.
•Suitable for use in continuous and discontinuous finishing units commonly used in the textile industry.For less whitening effect on cellulosic fabrics treated with fluorescent whiteners, the bath pH should be kept below 6. Drying temperatures should not exceed 120°C.
Use recommendations:
It is recommended to dilute Athon AM 725 Microemulsion using common cold water, at a ratio of 1:5 to 1:8.
Procedure:
•Add half the desired amount of water.
•Add Athon AM 725 Microemulsion while stirring for 30 minutes.
•Keep stirring and add the other half of total amount of water.
•Keep stirring for another 10 minutes.
The dilution time can be reduced (10 – 15 minutes) by gently heating the initial mixture to 40-50°C.
Application by foulard (paddling):
5 to 10 g/L based on pure Athon AM 725 Microemulsion, or 30 – 60g/L based on a 1:6 dilution of the product in water.
Maintain pH at 5.5 – 6.5 using acetic acid.
Application by exhaustion:
For a 1:5 – 1:20 bath ratio, use 3 to 6% Athon AM 725 Microemulsion as supplied, and maintain the pH at 5.5 – 6.5 using acetic acid. Drying for 20min at 40°C.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 669 Emulsion is an aqueous, nonionic emulsion containing 60% amino functional silicone fluid.
Athon AM 669 Emulsion provides durability to products formulated with it, being easily incorporated into textile formulations in combination with conventional softeners.
Provide elastic effect to fabrics, preventing the formation of wrinkles. It improves smoothness of the treated fabrics even without the ironing process.
It should be preferably mixed to the fabric softener at the end of the fabric production process under gentle agitation. Its dosage in the softener depends on the desired performance and should be balanced according to the content of organic softener in the composition.
Household
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 661 Emulsion is a concentrated macro-emulsion of silicone with amine groups in water.
Athon AM 661 Emulsion is easily incorporated into textile formulations in combination with conventional softeners.
It provides elastic effect to fabrics, preventing the formation of wrinkles and improves smoothness of the treated fabrics even without the ironing process.
It should be preferably mixed at the end of the fabric softener production process under gentle agitation. Its dosage in the softener depends on the desired performance and should be balanced according to the content of organic softener in the composition.
Household
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 649 Emulsion is an aqueous cationic emulsion containing amino functional silicone fluid.
Athon AM 649 Emulsion is a white, milky liquid with homogeneous appearance. Excellent stability even after dilution. Good resistance to detergents and compatible with organic softeners. Provides durability to formulations, being easily incorporated into textile formulations and car paint treatments.
Product used as raw material for the production of car care and home care materials containing solvents (e.g. polishers, vinyl protectors etc.). Widely used as an aid in fabric softening products. Facilitates the ironing process.
Household
Textile finishing
Thread manufacturing
Antistatic
Household & Autocare
Industrial Textile
Leather treatment
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8663 Fluid is an aminofunctional silicone fluid.
Athon AM 8663 Fluid is suitable for use in formulations of textile finishes that require non-yellowing materials.
Features excellent softening properties when applied to fibers, knits, cotton fabrics, cotton-polyester blends, and others. Easily formulable in micro and macro emulsions, it is not necessary to use high shear equipment for its preparation.
Textile finishing
Thread manufacturing
Household & Autocare
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8616 Fluid is a self-emulsifying preparation containing silicone- polyether fluid used for softening fabrics with hydrophilic properties.
•Self-emulsifying silicone preparation
•Provides great feeling of softness and smoothness
•Instant hydrophilic behavior and consistent water absorption properties
•Hydrophilic softener especially suitable for cotton, linen, polyester and blends of these fibers
•Excellent fiber elasticity and shape recovery
•Can be applied by exhaust, exhaust and spray processes
Athon AM 8616 Fluid is a self-emulsifying, hydrophilic silicone textile softener developed from new and innovative molecules. Provides softness and smoothness as well as hydrophilicity to virtually all types of fibers and fabrics. Being more effective than other common silicone softeners, it has great performance even applied in smaller amounts. It is very stable in the normal textile finishing process without causing oil stains on the fabric.
Dilution instruction
•It is recommended to dilute Athon AM 8616 FLUID using cold water, in a ratio of 1 to 5 to 1 to 8.
•Add half the amount of water.
•Add Athon AM 8616 FLUID with gentle agitation for 30 minutes.
•Keep stirring and add the other half of the calculated amount of water.
•Continue stirring for another 10 minutes.
The dilution time can be reduced by gently heating the initial mixture to 40 to 50°C.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8070 Fluid is an aminofunctional silicone fluid.
Athon AM 8070 Fluid has been specially developed to provide excellent softening feature. Has low effect on the degree of white in formulations of textile finishes.
Athon AM 8070 Fluid features soft, elastic feel when applied to fibers, knits, cotton fabrics, polyester cotton blends, and more. Easily formulable in micro and macro emulsions. It can be combined with other components such as: esters of fatty acids, paraffin etc.
Acabamento Têxtil
Fabricação de Linha
Household & Autocare
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8025 Fluid is an amino functional silicone fluid.
•Imparts remarkable slickness & softness to various fabrics
•Easily emulsified into a clear micro-emulsion or white emulsion
•Low yellowing
Excellent softening characteristic when applied to fibers, knits, cotton fabrics, cotton-polyester blends, and others. Easily formulable in micro and macro emulsions. No necessary use of high shear equipment for its preparation.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8020 Fluid is amino functional silicone fluid with modified amino groups.
•Premium fabric softener
•Low yellowing
•Hydrophilic effect
Athon AM 8020 Fluid can be applied to fibers, knits, cotton fabrics, cotton-polyester blends, and others. Easily formulable in micro and macro emulsions. It can be combined with other components such as: fatty acid esters, paraffin etc.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 8012 Fluid is an aminofunctional silicone-polyether fluid.
Athon AM 8012 Fluid has been specially developed to feature excellent softening properties. No effect on color tone or solidity on dyed items.
Athon AM 8012 Fluid features extra smooth soft hand. Self emulsifiable product, it is easily diluted in water. It provides a hydrophilic characteristic that can be applied diluted only or in formulations combined with other silicone or organic softeners such as fatty acid esters, paraffin and others according to previous evaluation. Can be applied by Foulard or Exhaust.
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 510 Hydrophilic Agent is a compound based on ethoxylated carboxylic acid.
•Highly recommended for sportswear
•Widely applied in clothing and technical articles to improve hydrophilicity
•Increases the transport of moisture from synthetic fabrics
•Confers excellent antistatic properties to polyester
•Improves anti-dirt properties (soil release) of synthetic fabrics
•Gives synthetic fibers excellent hydrophilicity, moisture transport and anti-static effects, with good resistance to gentle washing processes
•Provides excellent absorbency to synthetic fabrics such as 100% polyester, 100% polyamide and their blends
Athon TX 510 Hydrophilic Agent is specially developed for synthetic fiber finishes, improving the normally low comfort of synthetic-based garments, making it great for sportswear and performance wear, as well as non-wovens and other technical items where absorbency is required. long lasting. Also effective as an anti-dirt finish for polyester fibers and their blends. Due to its high affinity with polyester fibers, Athon TX 510 Hydrophilic Agent forms a hydrophilic protective layer on the surface, preventing dirt from adhering to the fiber, being efficiently removed during washing.
Preparation of prediluted stock solution:
•To decrease viscosity, preheat Athon TX 510 Hydrophilic Agent to 40°C.
•Add 81.10 parts of demineralized water to the clean reactor at 40°C.
•Add 18.75 parts of Athon TX 510 Hydrophilic Agent with moderate agitation.
•Heat up to 50°C and mix until homogenized for approximately 15 minutes.
•Cool with stirring to 35°C.
•Add 0.15 parts of biocide and shake for another 5 minutes until smooth.
Application:
•Foulard (Paddling): 5 to 50 g/L of pre-diluted stock solution with 50% pick-up
•Exhaust or spray: 0.5 to 2.0% of the fabric weight.
Normal drying is enough to obtain the desired effects.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 440 Formulation Aid is an aqueous polyurethane dispersion used to optimize water and oil repellent fluorocarbon based finishes.
•Short chain aliphatic polyurethane dispersion with functional groups to improve the properties and permanence of fluorocarbon-based finishes on all types of substrates
•Easy dispersion in the treatment bath
•Optimizes the resistance to wet and dry cleaning of fabrics with an oil-repellent finish
•Improves the film-forming properties of fluorocarbons
•Free of solvents, formaldehyde and oxime. Reduces VOC emissions
•Reduced yellowing when overcured or subjected to high temperatures
•Improves compatibility and stability
.Athon TX 440 Formulation Aid is used from 15 to 25% of the total fluorocarbon in the formulation, depending on the type of fiber to be treated. Additions greater than 15 g / L for synthetic fibers or greater than 25 g / L for natural fibers can promote high water repellency and result in a harder feel.
Curing is achieved by treating the substrate at 150-160 ° C for 1 to 2 minutes. It is recommended to carry out the final test after 24 hours of acclimatization to room temperature, when the properties of the treated material must reach the optimum point.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 310 Pro-Elastic is an aqueous polyurethane-polyether preparation for the elastic finishing of cellulosic fibers and blends of cellulosic and synthetic fibers.
•Athon TX 310 Pro-Elastic is a polyurethane-polyether polymer
•Self-crosslinking agent that forms a permanent, highly elastic film around the fibers, free of formaldehyde.
The touch is soft and high volume
•Easily miscible with water
•Stable to hard water salts and weak acids and weak alkalis
•Provides, especially to synthetic materials, a pleasantly full and soft touch
•Reduces wrinkles in items for drying on hangers or in clothes dryers
•Application preferably by foulard, or also application in foam and by exhaust processes.
•Fabrics must be cured above 130°C after drying to complete crosslinking and fix the product to the fiber. Curing conditions: 130 – 180°C for 3min.
•Normally 20 to 40g/L of the product are used in finishing preparations together with other products, depending on the process in which it is applied.
Reduction of formaldehyde content using resins in cellulosic fibers
Cellulosic materials and blends of cellulosics with synthetics are often given a resin finish, usually synthetic resins such as DMDHEU (dimethylol- dihydroxyethylene urea), DMU (dimethylol-urea), DMEU (dimethylol-ethylene-urea) etc. To reduce the formaldehyde content, Athon TX 310 Pro-Elastic can be used to replace up to half of the synthetic resin without any change in the mechanical and technical properties of the fabrics.
Athon TX 310 Pro-Elastic is self-crosslinking, without the need for a catalyst like synthetic resins. If used in combination with synthetic resins, these must be cross-linked with weak catalysts such as
magnesium chloride or aminohydrochloride, as the product may react with strong catalysts such as nitrate or zinc chloride.
Improved abrasion resistance
The film formed on the fiber surface improves abrasion resistance. As the film is permanent, the improved abrasion resistance is maintained even after repeated washing, for example on cotton.
Reduction in pilling
Athon TX 310 Pro-Elastic binds fibers together, preventing mechanical migration of individual fibers to the fabric surface and decreasing pilling.
Improved friction resistance (rub fastness)
The improvement in friction resistance obtained with this product depends on the dye class, fiber type, fabric structure, etc. Preliminary tests must be carried out in the laboratory.
Bonding of Fibers to Nonwovens
An addition of approximately 1% solids forms bridges between fibers. Athon TX 310 Pro-Elastic is an
excellent additive for gluing preparations used in the production of nonwovens and felt. Experience shows that adding the product gives an even softer and more flexible feel. The optimal addition must be established in each case individually.
Attention:
Athon TX 310 Pro-Elastic is amphoteric – when applying it in combination with other products, especially cationic, the stability of the preparation must always be checked beforehand. Preparations containing Athon TX 310 Pro-Elastic must be tested in the laboratory to ensure that they do not cause a shade shift under the specific application conditions. There is usually a slight change in shade, but it can be more pronounced with certain dyes. In exceptional circumstances, staining of treated fabrics may occur.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 280 Anti-Yellowing is a blend of non-ionic surfactants.
•Completely miscible with cold water •High stability
•Prevents or reduces yellowing in polyester, polyamide and polyamide/elastane fabrics during heat treatments
•Prevents yellowing of the fiber and impurities, such as oils
•Guarantees greater reproducibility of the dyeing, with excellent color yield
•Very useful in directly heated stent equipment, where the formation of NOx gases is a common problem
•Can be used on textiles that need to comply with Ecolabel and Oeko-Tex 100 standards
Athon TX 280 Anti-Yellowing prevents the oxidation of amino terminal groups of the polyamide during heat treatment, which allows the dyeing process to obtain better yields and reproducibility.
Especially recommended for foulard application, best
Results are obtained by applying Athon TX 280 Anti-Yellowing just before the heat treatment. After treatment the fabric can be washed if necessary. Reductive or fluorescent bleaching can be performed in conjunction with washing. Fabrics can be dyed in the usual way.
Usage suggestion:
10 to 30 g/L of Athon TX 280 Anti-Yellowing, with pH adjusted to 5 to 6 with citric acid and approximate pick-up of 50 to 75%. If necessary, intermediate drying at 100°C and then heat treatment at 180 to 200°C. This is followed by scouring, dyeing or optical bleaching treatments.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 230 Anti-Wrinkle is a preparation of fatty acid esters specially formulated for the prevention of wrinkles and creases in fabric processing.
•Stable to hard water salts, alkalis, acids, sodium chloride up to 80g/L and sodium sulfate up to 80g/L
• Prevents the formation of creases in motion in natural and man-made fibers and their blends during wet finishing of rope-shaped fabrics and knits
•Can be applied in all dyeing units commonly used in the textile industry, including jet units
•Can be diluted/cold emulsified; form stable stock solutions
Athon TX 230 Anti-Wrinkle is used for cellulosic fibers, wool, acrylics, polyamides, polyesters and blends of these fibers. Ideal use in pre- treatment, dyeing and post-treatment, with low foaming, good stability to alkali and electrolytes. It is suitable for jet application, being stable at temperatures up to 135°C. It can be emulsified by stirring in water (up to a maximum of 35°C). This initially causes creaming, but the product later emulsifies with continued stirring.
The recommended amount of use ranges from 0.1 to 0.3 g/L, but higher concentrations can be used if necessary. No adverse effects were observed in products dyed or treated with optical brightener, not soiling the dyed items. If an anti-foaming agent is required, use Athon FB 900 Antifoam (Athon silicone-free anti-foam).
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 1108 Textile Sealant is a one-part elastomer. Viscous material with great fluidity for application on fabrics. It cures at room temperature through moisture in the air and becomes a flexible rubber.
•Low viscosity, good tissue penetration
•Good non-slip properties
•Excellent adhesion to a variety of fabrics
•Drum and bucket packaging, from where it can be pumped directly into the application
Non-slip coating for application on fabrics for use on socks, tops, bras and trouser waistbands, avoiding the use of suspenders.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon TX 1107 Textile Sealant is a one-part elastomer. Viscous material with great fluidity for application on fabrics. It cures at room temperature through moisture in the air and becomes a flexible rubber.
•Low viscosity, good tissue penetration
•Good non-slip properties
•Excellent adhesion to a variety of fabrics
•Drum and bucket packaging, from where it can be pumped directly into the application
Non-slip coating for application on fabrics for use in socks, tops, bras and trouser waistbands, avoiding the use of suspenders.
Textile finishing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon MQ 885 Resin is a non-flammable hydrotreated hydrocarbon silicone resin solution used in the formulation of mold releases and water repellants.
•Good heat stability
•Water repellency superior to common silicone fluids
•Provides mold release and shine to formulations
Athon MQ 885 Resin is usually diluted with solvent (1 part product to 10 parts solvent) prior to brushing or by spraying onto the mold. Suitable solvents: aliphatic, aromatic or chlorinated hydrocarbons.
Also used in product formulations for HomeCare and AutoCare, providing shine and fixation by film formation, as well as premium water repellency.
Release agent
Household
Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 715 Emulsion is a finely dispersed silicone based water emulsion.
Athon AM 715 Emulsion has particle size in the nanometer range. It can be easily diluted with water or easily incorporated into formulations by cold blending.
Athon AM 715 Emulsion is mainly used as an active polisher in the household cleaning industry. It is also ideal for impregnating natural or synthetic textiles at the washing machine, where it is recommended to be applied during the rinse cycle. The impregnation effect is achieved without loss of tissue transpiration.
In addition, Athon AM 715 Emulsion is suitable for hydrophobizing various materials such as textiles, leather, wood, cork, paper, etc. For these applications, it is diluted with water to an Actives Content of 1 to 5% (from 6 to 30g of the product plus sufficient water for a total of 100g).
Household
Textile finishing
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 500 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 500 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 350 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 350 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 200 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 200 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Bombona 20L
Tambor 200L
IBC 1.000L
Athon DM 100.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 100.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 100 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 100 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 60.000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 60.000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 50 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 50 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges. High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 12.500 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 12.500 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial processes
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon DM 1000 Fluid is a linear and non-reactive polydimethylsiloxane (PDMS) fluid.
•Athon DM 1000 Fluid is a transparent, clear, odorless and colorless material
•It does not present a significant change in its physical- chemical properties, even in extreme temperature ranges
•High flash point and low freezing point
•Good dielectric properties, low surface tension
•High heat resistance and non-reactive chemically
•Excellent properties of water repellency and good solubility in various solvents
Its physical chemical characteristics confer excellent properties such as: release agent, antifoam, water repellent, dielectric fluid, additive for textile finishes and lubricants.
Release agent
Antifoam
Water repellent
Dielectric fluid
Textile finishing
Lubricant
Household & Autocare
Industrial Textile
Industrial Release Agents
Canister 20L
Drum 200L
IBC 1.000L
Athon AM 220 Fluid is a composition containing functionalized silicone fluid, used as lubricating and release agent in industrial processes.
•Good spreading
•Efficient mold release and lubrication
•Stable on storage, even when diluted
Athon AM 220 Fluid is used in common industrial release processes, replacing common silicone fluids for better performance and efficiency. It can be used neat or diluted with solvents to the desired concentration. Suitable solvents include: chlorinated, aliphatic (hexane, turpentine) and aromatic (xylene and toluene) solvents. Athon AM 220 Fluid is also recommended for thread lubrication, providing high process performance.
Release agent
Thread manufacturing
Industrial Textile
Canister 20L
Drum 200L
IBC 1.000L
